View Single Post
Old 02-12-2019, 09:02 AM
albee1952 albee1952 is offline
Join Date: May 2004
Location: nashville
Posts: 34,600
Default Re: move HD3 with HDX and 192 with HD IO

For troubleshooting, I would simplify a bit. Disconnect the 192 so only the HD IO is connected. You say the outputs are working? Open the IO setup>Input tab. Delete all the input paths. Then create 8 mono inputs and "connect" by the grid matrix to the 8 analog inputs and test just those inputs. If they work, then shut it all down and connect the 192(which can connect to the HD IO expansion port, or directly to the other port of the HDX card) and add only the 8 analog inputs(same as above on the HD IO). Remember to connect the Loop Sync BNC cables.
Gigabyte X79/intel i7 3930K, 32GB RAM, DIGI003 Rack

The better I drink...the more I mix.....

BTW, my name is Dave, but most people call me.........................Dave
Reply With Quote