Re: version 2.0.1 unit not displaying ERXP amps
If your rack unit is showing firmware 2.0.1, then that is the expansion pack firmware and you should see the added amps. You need a code in order to run the expansion pack installer, so unless you received the codes, you will not be able to try installing it again.
Do NOT try installing the older firmware or you it will overwrite version 2.0.1 and you will have no way of getting it back without buy the pack again.
Your best bet would be to open a support case with Avid to see if they can help since you already have it installed on the rack unit.
|