Quote:
Originally Posted by joeydego
I do not have a wordclock cable, no. I think this was the problem. When I set the presonus clock source back to internal, everything fixed itself. Do you think theres a benefit to setting the apogee as the clock? Thanks.
|
where are you located ??
1) clock the 200 from the 192 via Wordclock - this way when you change settings in PT the 200 will follow along (WC is just a BNC cable) .. toe 200 will probably be fine Clocked this way
2) or you could send a SPDIF signal back to the 200 and use that as your clock source - setting 200 to Spdif Coax as clcok source (until you get a BNC WC cable)
the differences in clocking the 200 from the 192 or vise versa is up to what you hear and like .. try it both ways and see what you like better - i would think that the 200 would re-clock better - so it would be fine being the slave
but that said, you might like the way it sounds better if you use the 200 as the master clock ..
cheers john