Quote:
Originally Posted by Audioartist
I use mostly one stagerack as well.
Led just flashes red and asks for wc cable to be connected.
When connected madi falls out of sync it is the standard dropout thing and loosing audio.
It seems that the profile just does not deliver clock very well.
|
I am no Avid tech support, so they could probably do a way better job at helping, but I would check the internal cabling as I suggested before and another thing that comest to my mind is that you could try to swap the places of the snake cards, make the upper card become lower and the other way around. That way, if one has a bad output connector and the other one has bad input connector you would end up using different connectors and maybe you get lucky and it works! Or it's just the internal ribbon cable needing reseating. If I was you, I would take it all apart, remove the dust and reseat everything or if I would feel uncomfortable doing that by myself I would hire someone good to do it for me. It's a PC so anything can happen :-D I would also contact Live Sound Tech Support and maybe they can read out something from the log files about any of the cards being faulty and so on.
Take care!