[aftermid]

Hi Lance,


Great tips. I had tried the Encoders for panning. And you're right using all three banks, you'll only get about 12 panning knobs. I was hoping by selecting a channel, I could control the panning for that channel, just like you do for the EQ, Gate, etc.



I did notice that if I have a stereo channel in PT, Midas sees that as one channel. So when you pan it only pans the left panner. I noticed that if you are in Group DCA 1-8. The first DCA will move channel input one, if you move the DCA fader, why? Are the DCA Groups stereo channels? Also, if remote is off and you select MTX 1-6, the seventh fader's scribble strip is black, why? If you are in remote mode, and use MTX 1-6 and hit the Fader Flip button you can't turn it off, unless you click another bank.
I wish their manual would explain some of this more in detail.



I did try the midi route to see if I could control the panning that way, but no luck.