Quote:
Originally Posted by Sardi
Firstly, that’s an unsupported configuration.
Secondly, when you say no sound, is the play head moving in Pro Tools? If so, check to see what soundcard its defaulting too. I know you say on board audio, but if you have an HDMI/DisplayPort monitor connected, it can also be used as a Pro Tools output, so it may have selected that. Mine has in the past.
If it’s the correct soundcard, check the I/O settings and perhaps set them to default and then make sure your track outputs are configured correctly.
Sent from my iPhone using Tapatalk
|
Thanks for that.. I didnt realize they werent compatible.
So according to this:
"Intel® Mac with Mac OS X 10.8.5 (only supported below Pro Tools 12.5), 10.9.5 (only supported below Pro Tools 12.8), 10.10.5 (only supported below Pro Tools 12.8.2), 10.11.6, 10.12.6 (only supported with Pro Tools 12.8 and above) or 10.13.2 (Pro Tools 12.8.3 and above)."
My version of PT will only work as intended with Mavericks 10.9.5.
Fair enough I will see about downgrading OS to match that.
As far as the play head.. when I press play it plays fine.. ie it goes across the track but no output and I am just using the basic template for house.
I am trying to learn PT .. I started a few years ago but want to re-immerse into it again..
Thanks for the response.