Re: ProTools was working but it is now "Unable to locate Digidesign hardware"
I think you need at least version 8.04 with Vista, but I would go to 8.05 if you haven't already done so;
http://avid.custkb.com/avid/app/self...p?DocId=393651
And install latest drivers to go with 8.05;
http://avid.custkb.com/avid/app/self...p?DocId=379411
Re-install drivers with interface turned off then reboot with it turned on.
Once 8.05 installed run plugin updater;
http://avid.custkb.com/avid/app/self...p?DocId=362895
I've found at least on my system, that switching hardware Interface on before booting computer, and shutting computer down before turning Interface off helps avoid the problem of losing driver communication with computer.
__________________
Too much blood in my drugstream
Motherboard: Gigabyte Z690 AERO D
CPU: Intel Alder Lake Core i9-12900K
CPU Cooler: Noctua NH-D15S
RAM: Corsair Vengeance DDR5 64GB (2x 32gb 5200MHz)
Drives: 2 x Samsung 980 Pro 2TB NVME PCIE 4.0 M.2 SSD (Record & Samples)
1 x Samsung 980 Pro 1TB NVME PCIE 4.0 M.2 SSD (OS Win 11 Pro)
GPU:Gigabyte GeForce RTX 3060 12GB GDDR6 PCIE 4
PSU: Corsair HX Series HX850 Platinim
CASE: Fractal Define XL R2
PT 11HD (v11.3.2) Omni s/pdif <> AxeFxIII
HD 96I/O
|