Re: Connecting AI-3...
Coley,
you'll need 2 optcial cables,(shorter the better).
plug AI-3's adat optical out to 001 pci's optical in.
plug AI-3's adat optical in to 001 pci's optical out.
Launch Pro tools.
In Setup menu, choose Hardware Setup.
Choose optical(ADAT) as your Clock.
select ADAT as your Optical Format.
That should do it.
The poping/crackling noise could be from either a bad sync or buffer size setting. If you follow the settings above, you should be fine.
Also try increasing the buffer size.
It's also recommended that you relaunch Pro tools after changing these settings.
Cheers,
John
|