[RickoDean]

On my pthd9, my audio files are named audio 1,2,etc. imported audio (stereo) files that have a song title are passed on to the file (L-R). Not sure if there’s a preference setting that would allow you to change the audio file name. In regards to pt not communicating with your digi002r, try plugging the cable in a different fw port, in the back of the 002. I would also try to plug the cable into a different fw plug on your computer. If that doesn’t work, try a different cable. If the problem still persists, I would begin to consider a internal issue inside the digi002 itself. Depending on how old it is, it’s probably time for service or maybe even a replacement. Not to startle you but it is something to take into consideration.

I had a similar issue with my 192 I/O not connecting to pthd9. I changed my cards from d/a, a/d to a/d, d/a and my issue went away. I don’t recommend that you open the box if you don’t have experience in that arena considering we’re using the same program but different platforms.


Sent from my iPhone using Tapatalk