Re: No signal from Ditto Looper in the FX Loop of the Avid Eleven Rack
You do hear normal playing though the headphones right?
Most of these problems are caused by having the FX loop send, return and mix settings incorrect. Have you read the Elven Rack User Guide about the FX Loop and tried adjusting those FX loop settings?
You should be using the L/Mono side of the FX loop and the FX Loop in the rig should be in mono mode. All explained in the User Guide.
Eleven Rack rear panel FX Loop return level push switches should be set to the stompbox position, but if set wrong that won't stop this working.
If checking the above does not help then, as with any guitar amp FX loop debugging, grab a straight through piece of cable and jumper the loop output to loop input and make sure that works as well (at 100% FX loop mix).
|