[Darryl Ramm]

You need the FX loop turned on (see Benoni’s question), the FX Loop levels and return % (I forget what exactly they call that in the FX Loop effects control) set correctly, the FX Loop correctly positioned in the Eleven Rack rig. Some of this stuff is described in the User Guide. Also read about the level meters on the Eleven Rack front panel display in the rig view, they are very handy.

You can do a null cable test just with the FX send jumped to FX return and play with the return % and confirm that works as expected. Including when you disconnect the cable. Then take a single really obvious effects pedal and turn the effect up to a super obvious amount and connect that into the FX Loop. Does that work?

Are you using wah and volume pedal inside the Eleven Rack or physical pedals?

Pedals turned on and good batteries or power supplies working? If needed test all cables one at a time in the null test and add pedals in the chain one at a time. Also test pedals one at a time by putting them between the guitar and guitar input.





Sent from my iPad using Tapatalk