Re: S3 static IP address
First, I apologize...I've only skimmed the S3 manual...I didn't realize it was so lacking.
Now, a suggestion...
Try connecting the S3 directly to a network port on your computer with a crossover cable.
Then fire up Eucon and see if it can "see" your S3 unit.
Keep in mind that IP addresses are only required by the TCP/IP protocol, which is only one of several protocols that can be used on an ethernet network.
IIRC, Avid's ICON units connect via: MAC addresses and do not need IP's...it's possible S3 works similarly.
Beyond that, perhaps Tom Graham can jump in and enlighten us...
__________________
X
Note that all opinions, observations, whatever, in this post are mine, unless I'm being mean or am wrong, in which case it's somebody else's fault. I do not work for Avid (their loss)...my only relationship with Avid is that of a customer (when I'm not too poor to buy stuff, like now)...and that hot administrative assistant...that's more of a "thing" than a "relationship" (that should keep them guessing for a while...)
Just rockin'...what more is there?
Bill in Pittsburgh
|