View Single Post
  #1  
Old 06-25-2019, 10:41 AM
justinhill justinhill is offline
Member
 
Join Date: Mar 2019
Location: Horley UK
Posts: 85
Default Command 8 faders dead

It's a long shot but maybe somebody knows what this might be...

I bought a 'for parts' Command 8 which had a burnt-out transformer. Having replaced the transformer and confirmed both 12v AC connections were reaching the unit, I powered up and the unit came to life looking good.

But, none of the the faders work. They don't move and their values don't change either (i.e. if I move a fader in fader test mode the value displayed stays at zero). Every other button and switch appears to be working, the display is working, and the unit pairs with Pro Tools perfectly.

Before I start stripping the thing down I'm wondering if there is a common area between the motors and the encoders parts of the faders which anyone is already aware of and could advise me on?
__________________
--
Justin

Mix room: Apple Mac Pro 6,1 late 2013 2.7Ghz 12-Core XeonE5, 64GB RAM, D300 Graphics, OSX Mojave 10.14.5/Pro Tools Ultimate 2019.6/Presonus Quantum 4848 Thunderbolt 2/Digidesign Command|8/Allen & Heath ZED-436 for fun

Studio: Apple Mac Pro 5,1 mid 2012 2x 3.46Ghz 6-Core Xeon, 64GB RAM, GeForce GTX 970 graphics, OSX Sierra 10.12.6/Pro Tools Ultimate 2018.12/HDX1/Avid HD 16x16, Digidesign 192 16x16, Digidesign 192 16x8/Custom Raindirk Symphony 32ch. front end
Reply With Quote