View Single Post
  #2  
Old 07-10-2009, 08:36 PM
ddwhitney ddwhitney is offline
Member
 
Join Date: Mar 2008
Posts: 270
Default Re: How to Activate the Click/Metronome in Pro Tools 8

pg 349 and 350 of the reference manual...
Pro Tools provides options and controls for driving
a click. The following steps are for configuring
and enabling a click using the DigiRack
Click plug-in or MIDI.
To configure click options:
1 Open the Click/Countoff Options dialog by
doing one of the following:
• Choose Setup > Click/Countoff.
– or –
• Double-click the Metronome button in the
Transport window.
2 In the Click/Countoff Options dialog, do one
of the following:
• If using the TL Metro or DigiRack Click
plug-in, select None in the Output pop-up
menu.
– or –
• If playing a click using MIDI, select the port
number (device) and channel for the click
from the Output pop-up menu.


3 Specify the note, velocity, and duration for the
accented and unaccented notes.
When listening to the click in your Pro Tools
sessions, the accented note sounds on the first
beat of each measure and the unaccented note
sounds on the remaining beats.
4 Select whether the click is heard During Play
and Record, or Only During Record, or Only During
Countoff.
5 If using a countoff, specify the number of Bars
to be counted off. To hear the countoff only
when recording, select that option.
6 Click OK.

There is a button on the transport you need to activate
__________________
Digidesign 003R+PT 2020.12.0, Gigabyte GA-Z97X, CPU INTEL i7-4790 4.0Ghz, CORSAIR DOMINATOR 16GB; ATI Radeon™ HD 5450 PCIe Multiple WD Caviar Black 2Tb Spinner Drives; 1 PPA 80GB 1394 Firewire Oxford 911 PYRO PCI64R2 3 Port Firewire Card (PCIe) Antec 300 case. PSU 600W,
Windows 10 Home.

Last edited by ddwhitney; 07-10-2009 at 08:37 PM. Reason: hit reply too soon :(
Reply With Quote