Thread: 1/4” to xlr
View Single Post
  #3  
Old 05-15-2019, 12:26 AM
Sardi Sardi is offline
Member
 
Join Date: Aug 2002
Location: Perth
Posts: 1,508
Default Re: 1/4” to xlr

Sounds like you’re describing an Mbox Mini.

Wether you have the blue v2 or grey v3, the connectivity is the same. The only difference is that the line input on the v3 is a combo TRS/XLR jack.

Basically, you only have one mic input on those interfaces, but you do have two line inputs. If you have a v2, use the TRS inputs labelled line. On the v3 use the combo jack with a TRS cable and set the switch to line for input one and use the TRS input for input two.


Sent from my iPhone using Tapatalk
Reply With Quote