View Single Post
  #2  
Old 10-09-2011, 11:41 PM
zedhed's Avatar
zedhed zedhed is offline
Member
 
Join Date: Jan 2001
Location: Auckland, New Zealand
Posts: 3,902
Default Re: ProTools 9.0.5, iLok issues, Digi 003R+ issues

It appears to me that most of the 003R problems like this are Firewire connectivity related. It was certainly that when I first got my 003R.

I was trying to plug the firewire cable straight into my motherboard which as it turned out had an incompatible chipset with PT. I installed a Firewire card into my computer (Oxford chipset, Texas Instruments controller) and it worked.

I usually re-install iLok driver straight after a clean PT install.

BTW, once you get it working properly, I found that my system plays nicely with PT when I Turn on the 003 (& any other outboard gear) then boot computer up. When finished shutdown computer then turn hardware off. Before I wasn't doing this and I would get random problems with drivers not communicating properly.
__________________
Too much blood in my drugstream

Gigabyte X99 SOC Force Mobo Bios vF6d
Intel Core i7 5930k socket 2011 v3 @ 3.50GHz
32GB DDR4 Crucial RAM
System: Samsung M.2NVME SSD 960 Evo
Record: Samsung M.2NVME SSD 960 Evo
Samples: Samsung SATAlll SSD 840 Pro
Storage: 2x Samsung SATAlll SSD 840 Pro
EVGA GeForce GTX 750 Graphics
PT 11HD (v11.2.1) Omni s/pdif w Eleven Rack
HD 96I/O
Win 8.1 Pro
Reply With Quote