HI again,
Well after a few experiences on ebay (IE seller not sending board and another sending faulty board) I got hold an asus x99d eluxe board mint conditions for £250.00. I have installed it in my system along with my HD core accel and installed pro tools HD 10 ( HD not native) on my windows 7 ultimate 64 bit system. I connected my new digilink cable to the 192 and to the PCI-E card opened pro tools and get the following error
Quote:
|
PRO TOOLS HARDWARE IS EITHER NOT INSTALLED OR BEING USED BY ANOTHER PROGRAM
|
If I hold N down when launching at the splash screen I select HD core I get the following error
Quote:
|
"UNABLE TO FIND AN AUDIO INTERFACE ATTACHED TO THE FIRST HD CARD, PLEASE CHECK POWER AND DIGILINK CABLES. CLICK OK TO RESCAN. CLICK CANCEL TO OPEN THE PLAYBACK ENGINE AND SELECT A DIFFERENT INTERFACE"
|
(See pics below)
I have switched inside 192 audio cards over to another 192 and still get the same results. I have tried another known good digilink cable with same issue.
Does the 192 and core HD accel card work with native at all?
Just spent a small fortune upgrading from my 003 rack to 16 in and 8 out and cant get anything to work
Any advice please would be much appreciated.