Cool, thanks for the update. Here's a trick that should work to provide single-press functionality, even with a latching (non-momentary) switch.
Basically, you set the event up with two triggers - switch opened and switch closed - so that the event fires every time the switch changes state:
- Trigger = Input 1 (GPI Input 1), Closed
- Trigger = Input 1 (GPI Input 1), Open
- Here's the trick: set the Trigger logic (top right corner of Trigger box) to "OR" - this way, the event is triggered when the switch is opened, or closed
- Action = Recall Snapshot 001 <snapshot name>
This should work, and save you having to wire another switch.
Sheldon