Re: Accessing Sends with Encoder Issue?
Thanks for responding Eddie
Just to be certain I've just tried this again and it's as follows:
I create an audio track (have tried with both Mono and Stereo) I use Channel Control to assign a send to slot (a) on the track and pick the 'Buss' option.
I assign Buss 1-2 and then exit config mode and back out; when I select send with the same track still selected and press the Encoder below slot (a) which now says 'Buss 1-2' the send fader opens on screen.
However if I assign Buss 1 i.e. a mono Buss (have also tried Buss 3 or 5 etc.) and then exit config mode and back out; when I press the Encoder below slot (a) which now says Buss 1 the send fader does not appear on screen.
Hope that clarifies things...just want to make sure my unit is operating correctly.
Thanks again
__________________
Pro Tools 2020.3 on iMac 5K 27'' (2017) Intel® Core™ i5 processor.
OSX Sierra
Avid S3 & Artist Transport
UAD Apollo Twin
|