View Single Post
Old 05-01-2012, 11:00 AM
lberrios1962 lberrios1962 is offline
Join Date: Jan 2011
Location: Virginia Beach, VA
Posts: 70
Default Re: Control Surface For Protools 10 Mackie Pro Control or Avid Artist Control

Originally Posted by lampmusic View Post
I was fortunate to happen up on a slightly used Euphonix mix controller a few months ago at the local Samash store.

I was able to talk the guy down to $599 - a little less than half off :)

BUT . . . i've really had a time with the unit being recognized when I first boot up. I have determined that if my air wi-fi is on it will generate a conflict / error message every time. Then I have to open the euphonic software and select the controller manually from the available list - - every time.

The only time that the controller is automatically recognized on boot up is if the wi-fi router is down.

Can't seem to find any solution for that issue either.

Other than that it seems to work pretty well with PT-10HD.
Mine was perfect connected to the router but not connected to the computer. I changed the IP address to static but if I disconnected the cable and connected again the whole connection got lost for ever and I get a network error, and the only way to fix it was re-installing the whole Win 7 OS.
A pain in the butt.
Reply With Quote