[markjohn]

Got confirmation here also that the keyboard works fine. The only issue is related to SysEx which is another bag of tricks. This is probably redundant but, check again your OMS setup and see if OMS is receiving midi from your piece. Go to "Studio" menu and select "Test Studio" (command + T), your mouse arrow will change to an eighth note press the keys on your controller and use should hear "midi received" from your computer speaker. if this doesn't work, choose "MIDI Cards & Interfaces" from the "Studio" menu and select the "Update Setup" from the pop up dialog box, follow thru the set up and that should detect any new software or hardware. If you don't get any of this to work in OMS it's time to call someone, if you do get it to work in OMS it's time to move on to the PT MIDI menu. In Pro Tools go and select "Input Devices" from the "MIDI" drop down menu, verify that your controller has a check mark, if not check it, then select "OK" to exit from that window. Return to the "MIDI" drop down menu and make sure that "MIDI Thru" is checked. This should have you triggering any midi device in your oms set up via PT.

Hope this helps, good luck
M