Re: ProTools 9.0.5, iLok issues, Digi 003R+ issues
It appears to me that most of the 003R problems like this are Firewire connectivity related. It was certainly that when I first got my 003R.
I was trying to plug the firewire cable straight into my motherboard which as it turned out had an incompatible chipset with PT. I installed a Firewire card into my computer (Oxford chipset, Texas Instruments controller) and it worked.
I usually re-install iLok driver straight after a clean PT install.
BTW, once you get it working properly, I found that my system plays nicely with PT when I Turn on the 003 (& any other outboard gear) then boot computer up. When finished shutdown computer then turn hardware off. Before I wasn't doing this and I would get random problems with drivers not communicating properly.
__________________
Too much blood in my drugstream
Motherboard: Gigabyte Z690 AERO D
CPU: Intel Alder Lake Core i9-12900K
CPU Cooler: Noctua NH-D15S
RAM: Corsair Vengeance DDR5 64GB (2x 32gb 5200MHz)
Drives: 2 x Samsung 980 Pro 2TB NVME PCIE 4.0 M.2 SSD (Record & Samples)
1 x Samsung 980 Pro 1TB NVME PCIE 4.0 M.2 SSD (OS Win 11 Pro)
GPU:Gigabyte GeForce RTX 3060 12GB GDDR6 PCIE 4
PSU: Corsair HX Series HX850 Platinim
CASE: Fractal Define XL R2
PT 11HD (v11.3.2) Omni s/pdif <> AxeFxIII
HD 96I/O
|