Thread: Mezzo...
View Single Post
  #5  
Old 03-24-2015, 10:49 AM
heyjcjc heyjcjc is offline
Member
 
Join Date: Feb 2015
Location: U.S.
Posts: 6
Default Re: Mezzo...

Figured I'd keep an online log of the steps I'm taking to resurrect these tapes. If anyone needs the PACE installers or ATTO drivers or the configuration tool installer, or the Mezzo 4.7.4 installer, I have them and can email. I'm running into the issue that Mezzo boots up and the PCI card seems to be working, however Mezzo isn't listing the tape drive in the application itself. ATTO Configuration Tool shows a SCSI device present. Huge thanks to everyone that has helped me out on here, btw, and the guys at BMS Chace Nashville. If anyone has any info that could be helpful, I'd be truly grateful. As of now, the software I installed is a clean copy of OS X.4.11, Atto Configuration, Atto drivers and Mezzo 4.7.4

"As of 24MAR2015, 12:40 p.m.
Installed Apple OSX v10.4.11
Installed ATTO Express PCI Plus v3.21
Installed ATTO Configuration Tool v3.07

ATTO Express PCI UL3D SCSI-2, PCI SLOT-2
ATTO ExpressPCI UL3D:

Name: ATTO,ExpressPCIProUL3D
Type: scsi-2
Bus: PCI
Slot: SLOT-2
Vendor ID: 0x1000
Device ID: 0x0020
Subsystem Vendor ID: 0x117c
Subsystem ID: 0x8007
ROM Revision: 1.6.6f0

Under Parallel SCSI Device Tree: (when top rack unit is plugged in and powered)
SCSI Parallel Domain 0:

Initiator Identifier: 7

SCSI Parallel Domain 1:

Initiator Identifier: 7

SCSI Target Device @ 6:

Manufacturer: SONY†
Model: SDT-±0000 †
Revision: 0101
SCSI Target Identifier: 6
SCSI Device Features: Wide, Sync
SCSI Initiator/Target Features: Wide, Sync
Peripheral Device Type: 1

SCSI Logical Unit @ 0:

Manufacturer: SONY†
Model: SDT-±0000 †
Revision: 0101
SCSI Logical Unit Identifier: 0

Under Parallel SCSI Device Tree: (when bottom rack unit is plugged in and powered)
SCSI Parallel Domain 0:

Initiator Identifier: 7

SCSI Parallel Domain 1:

Initiator Identifier: 7

SCSI Target Device @ 5:

Manufacturer: SONY†
Model: SDX-µ00C †
Revision: 0102
SCSI Target Identifier: 5
SCSI Device Features: Wide, Sync
SCSI Initiator/Target Features: Wide, Sync
Peripheral Device Type: 1

SCSI Logical Unit @ 0:

Manufacturer: SONY†
Model: SDX-µ00C †
Revision: 0102

Tried both Rorke Data rack units. Neither recognizes tapes are loaded in Mezzo, nor does it list the tape drives. Under Device Status in Mezzo, only CD/DVD has anything listed, and it lists the Pioneer DVD-RW DVR-117D (B705) via ATAPI.

Top unit bay one is empty, bay two has DDS drive
Top SCSI ID reads: 5
Bottom SCSI ID reads: 6

Bottom unit bay one has unmounted scsi drive, bay two has AIT drive
Top SCSI ID reads: 3
Bottom SCSI ID reads: 5"
Reply With Quote