Quote:
Originally Posted by Frank Kruse
Just FYI:
I'm on BM 10.9.12 with 2018.4 and have zero problems.
Stable sync.
|
I tried running 2018.4 with BM 10.9.12 today and it still has the same problem with jumping picture around 2-3 seconds into playback. Once the playback is running it stays sync after that initial hickup, also when one puts a section in loop. On top of that the hickup at 2-3 seconds doesn't happen every time. It's about 50-60% of the playback starts (this might be an improvement over the 2018.3 with BM 10.9.7 combination, which had the hickup all the time).
Tested with a HDX2 system with BM Intensity Pro and with HDX system with Intensity Pro 4K. I know these cards are not genlocked, but the point is that with PT11 and BM 10.4.3 it worked perfectly.
I will test further with our Decklink systems later...
Greetings,
Thierry