View Single Post
  #10  
Old 06-22-2009, 07:52 PM
stainless stainless is offline
Member
 
Join Date: Jun 2004
Location: Sacramento, CA, USA
Posts: 561
Default Re: Control 24 set up

BN4vylon

I'll jump in
since the original post is/was quite old

are you connecting to a hub? or directly to your PC? If your PC has multiple ethernet connections make sure that they are set-up on the computer (I'm now on a Mac and it's been 3 years + so I don't recall the exact protocols for this)

are you using the correct ethernet cable (not one left over from your modem?)

IF/when you go to peripherals, and select the port, if Control 24 is showing up (meaning the computer "sees" it)... the problem is a software problem and you need to find the correct/current software version

and it sounds like a software issue (the good news)... the bad news is you have to go find the correct firmware (I believe this to be true)
__________________
Stainless - G5 2.3x2, 5 GB RAM, 1.5TB, OSX 10.5.x and 8.0 002R/D8, MC Control/MC Mix, etc, etc, etc
Reply With Quote