So, I was able to accomplish today. The main panel on the bottom right, unplug the two ribbon cables as well as the power from that plate. Plug it in and turn it on, your Pro Tools will see it as a fader pack. Afterwards, turn off the "fader pack", plug the power and ribbon cables back into the main plate, power up and you're set.
DO THIS AT YOUR OWN RISK
Video of it working
The only issue I found so far is that the banking jumps by 16 channels (since it thinks it's a true fader pack). There might be a bank option, I just haven't looked that deeply into it.
__________________
-Ryan Young
•2019 Mac Pro 3.5 GHz 8-Core Intel Xeon W - 48 GB 2666 MHz DDR4 (OS 10.15.5) •HD Native PCIe, HD Omni, 192 I/o, Pro Tools Ultimate •Avid S3 + Dock •Blackmagic Intensity Pro (HDMI) •5.1 Room with JBL LSR4300 series
Additional Systems
•2010 Mac Pro 2 x 2.66 GHz 6-Core Intel Xeon - 48 GB 1333 MHz DDR3 (OS 10.14.6) •HD Native PCIe, 192 I/o, 96 I/o, Pro Tools Ultimate •McMix (x4), McControl (x1), JLCooper Surround panner for D-Command ES, Avid Control •Blackmagic Intensity Pro (HDMI) •7.1.4 Room with JBL LSR4300 series
•2017 MacBook Pro 2.8 GHz i7 - 16 GB 2133 MHz LPDDR3 (OS 10.14.6) •HD Native TB, HD Omni, Pro Tools Ultimate •McMix (x1), McControl (x1), Avid Control * or * D-Command ES Main Unit •Fed into whichever system is the main system