Quote:
Originally Posted by jclark5093
When I set the Pro40 to get clock from external SPDIF it loses sync. They are both set to 96kHz, I assumed that would be enough to let them both run internally clocked, but I will try with the 2 cables when I get them.
!
|
Huh? One device needs to be set to internal clock and the other device needs to be set to clock from the other device, you have to do that, otherwise there is no way the clocks are in sync.
Always start/debug things as simply as possible. That would be with *one* S/PDIF cable. Connect the S/PDIF Out on the Eleven Rack to the S/PDIF In on the Pro 40, remove the other S/PDIF cable (and anything else unneeded) and set the Pro 40 to clock from the Eleven Rack. A bad cable or faulty device at either end of the cable can cause clocking problems. For grins also try 44.1 and 44kHz sample rates if you are still having problems after the new S/PDIF cable.