[joachim]

Originally Posted by SWBoatman25

I am just curious if anyone knows the button to fine tune the fader if holding the command key doesn't work.

I am on PT 11, but isn't Command+Shift+Click/Drag the fine tune mode, which also contrains movement to vertical ?

Originally Posted by Kyle Splittgerber

Hi Guys,

In 12.6, Grid Toggle was introduced. This allows the Command (Mac) or Control (Win) key to temporarily enable or disable Grid. Before 12.6, you could only use Command/Control to suppress Grid when in Grid mode, but could never enable Grid when in Slip. This change is a significant improvement to editing in Pro Tools.

However, this change means Command/Control can no longer be used for fine breakpoint adjustment. So, we had to make a trade off. That trade off is that Shift+Command (Mac) or Shift+Control (Win) to now required for fine breakpoint adjustment with the Grabber tool. Keep in mind, this change only affects Slip mode. Shift+Command (Mac) and Shift+Control (Win) were always required for fine breakpoint adjustment in Grid mode before 12.6 (as Command/Control was used to suppress Grid mode).

Also, be aware that the order the modifier keys are pressed impacts the behavior. If Shift, then Command/Control is pressed, fine breakpoint adjustment is performed at the current breakpoint location. If Command/Control, then Shift is pressed, Grid will be enabled/disabled first, then fine breakpoint adjustment is performed. For example, if you are in Grid mode and you want to drag a breakpoint off Grid then perform fine breakpoint adjustment, hold Command/Control and drag the breakpoint to the desired location, then add Shift and drag breakpoint vertically. Same logic in Slip mode. Another example, if you are in Slip mode and want to stay in Slip mode and perform fine breakpoint adjustment, drag the breakpoint to the desire location, press Shift first then Command/Control and drag breakpoint vertically.

http://duc.avid.com/showthread.php?p...54#post2384454