Re: Edit selection and playhead start
Until 10.3.4, glide-to-all-enabled did not work as specified in the manual, but "nobody" noticed and got accustomed to that. Than Avid made it to work as specified.
Maybe this is the same for the behaviour of insertion versus selection in dynamic transport mode.
According to the ref guide, the playback location MUST not change to the start of the clip when selected with the smart tool. Not a bug.
The playback location does not stay "somewhere" : it stays at the last insertion with the smart tool.
It does work vice versa : insertion with the smart tool = playback location , selection with smart tool = a selection, that does not change the playback location.
Again, why do you specifically use dynamic transport mode ?
__________________
PT 11.3.2 HD , RME Fireface 800 , Genelec 5.1 ,
Win7 64bit Professional , i7 3930 Hexcore , 48GB Ram , SSD System + SSD PT Session/Audio + SSD Video (all Samsung 840 Evo) + Spinner 1TB Data , 2x Radeon HD 5450 \\ SD 633 Femto MKH8060 MKH8070 MKH30/MKH40 DPA4060
Last edited by joachim; 05-27-2013 at 12:19 PM.
|