spill from analog outs to record tracks (when rec)
Hi guys and gals,
Sorry to crash the TDM forum, but haven't been able to get a response on the LE forum after a couple of tries, so I am hoping that the pros have some ideas.
When I am recording a track it seems to pick up spill at a very low level from the analog output. This even happens with just the click track. It will be set to analog 1-2, say on audio track 1 and does not show up on the track to be recorded, say track 2 until the recording starts. As soon as I start recording I get the click (and anything else coming out analog 1-2, ie the rest of the session) at a very low level on my newly recorded track. This happens even if I pull everything out of my mbox, including the cans (except the USB cable of course). Naturally, I have tested this with no mics or monitors plugged in.
This is driving me nuts. I'm sure that it is something really elementary that I have overlooked. I just need someone to point it out to me.
Please help me,
Cheers,
Michael.
ibook G4 1.2gHz 1.25gb RAM
PTLE 6.9 MBOX
OS 10.3.5
__________________
ibook G4 1.2gHz 1.25gb RAM
PTLE 7.4 MBOX
OS 10.4.10
and other bits and pieces...
|