Pro Tools HD Distorted Audio Only On Left Side
If you have tried all the output pairs and the problem remains on the left channel then that tells you this is unlikely to be the HD IO, there is no difference there between left or right IO ports and no common way that all "left" ports develop a problem in the HD IO.
You are still not described *exactly* what you have done in any test and the results. Guessing what this "sounds like" is not likely helpful, just logically troubleshoot it.
Debugging this should take tens of minutes at most, swap IO L/R in Pro Tools tells you if this is a Pro Tools issue (unlikely but just do a quick check). Then simplify everything downstream and check stuff there. Everything past the HD IO output is the most suspect here.
Sent from my iPad using Tapatalk
Last edited by Darryl Ramm; 09-07-2017 at 09:46 AM.
|