[DigiTechSupt]

Mike covered most of it. Just to be a bit more specific, Inter App Communication (shadow port) is not working. Sync with sequencer apps. will have to be hard wired for the time being. The MidiMan (ISA card with 4X4 octopus) is the best recommendation for a Midi interface right now. The USD is operating through the serial port on the D|24 card. There is current no USD setup app. for the NT side. I assume this is in the works. We'll have a production cable in a month or so that will allow a machine control hookup. We're supporting the Bit 3 13 slot expansion chassis. Only one D|24 card is supported on this system (32 tracks on disk. 128 virtual tracks). As many Farms as a chassis will support (up to 10 cards total including the I/O card). SCII PCI cards are OK. Only core plug-ins are available (DigiVerb included) until third party developers port over. Some will be faster than others. Two Ultra Wide drives and an Adaptec card are required for full track count and performance. FAT 16 is highly recommended. FAT 32 will not work. NTFS will work but the compatibility issues are a big hassle. There's more but, check out the compatibility doc on the Digi web site for basic platform info. For what it is right now, it rocks. I hope this is helpful

Tom S.