Problem with Sonicwall Pro 1060
Today, I lost a tremendous amount of time trying to connect the MC pro to my main mac workstation. The ethernet connection is fine if I bypass the SonicWall and plug the MC directly to the computer but not when using the Sonicwall. I am running eucon 3.1.3 on the MC and tried both eucon 3.2.1 and 3.1.3 for the mac workstation with the same result.
Also the power light on my Sonicwall is flashing (green light). I suspect a problem with the sonic wall, This is the error message I get when the MC app is lauching:
"The Mc can not find an enabled network interface and is exiting"
Can anybody confirm the sonic wall is the problem? perhaps a reset could solve this? Should I look for another Sonicwall?
Another thing, if I bypass the SonicWall and plug the MC directly to the computer the MC app start and it shows "Starting MC software, Loading hardware driver…" for at least a minute before actually loading the MC application. We don't have this problem with our 2 other system 5 MC.
Any help would be greatly appreciated.
Thanks.
|