DI inputs missing from Pro Tools w/ Eleven Rack
OS - Windows 10 64 Bit - 2004
Pro Tools version 2020.5.0
Eleven Rack - Firmware 1.0.3
After taking a break from writing, I recently fired up pro tools to do some tracking. I opened a previously saved session and was greeted with an unfortunate error message: "Some inputs are missing" (1st attached picture)
I clicked 'Open I/O Setup' and I see the following (2nd attached picture)
I also received a communication error with "Eleven Rack #2." I only have 1 Eleven Rack connected (this is much less important than the input issue, but mentioning in case it might possibly have any relation).
I am able to play back the session fine, but any track that had a DI selection for the input (Guitar In, or Mic In) is now greyed out (picture attached). I can select the "Guitar In/Mic In" input option, but I am not getting any signal from my microphone with that selected. These previously showed up as two independent inputs, as shown in the attached image.
Any help would be greatly appreciated, I don't know why these inputs are now gone. I tried the "Restore from Session" option in the I/O window, but that didn't add any additional inputs.
Thanks
|