Re: 2009 4.1 (4) Core Upgraded to a 5.1 (6) Core
Quote:
Originally Posted by TVPostSound
I tried it all!! Washers, thermal pad, drop the fan connector etc.
Do a search for Delid with vise .
https://www.youtube.com/watch?v=AizBSTndfLg
I used an x-acto knife to cut the perimeter sealer, then used the vise method of shearing the solder horizontally.
Total success.
|
I actually practiced it last night with some old CPU's I had from previous upgrades to other computers. The ones that were soldered, left a lot of solder on top of the CPU.
Did that happen to you, and if so, how did you go about removing it?
I really don't want to screw it up, it's an expensive mistake.
Either way, it will be worse case, as I plan to try the more conventional steps first.
I appreciate any insight you can give me as one way or the other, I will be attempting the upgrade this weekend.
__________________
HD Native Pcie, PTHD 11, PT12 Vanilla, Omni, Lynx Aurora 16, 192 I/O (16 in/8 out), 24 Fader D-Command, lots of preamps and compressors.
MacPro 5.1 (12) Core (2009 MacPro 8 Core Upgraded to a 12 Core MacPro), 56 Gig Ram, SSD System & 3 - 2TB Drives, OSX 10.9.5, Windows 10 Via Bootcamp
|