S6L/S3L Pro Tools Playback Engine Restrictions
Hi there,
Maybe someone found a workaround for this. To unlock the 64/128 Ch. recording capacity you have to set the Pro Tools Playback Engine directly to the E3L/E6L Engine. But if you do so, you aren't able to send Signals to other Devices out of Pro Tools. This is my use case: I'm using a S6L at FOH and Mons and they're both sharing the inputs. The Broadcastmix is fully done in Pro Tools with the same inputs and a S3 faderboard. I tried to generate a aggregate I/O device for using the S3 AVB outs for my Monitors and also sending the outputs via Dante to the embedder. This isn't working at all cause Pro Tools needs to have the Engine as Playback Engine, even if you have the "Live Sound Production Toolkit" License on the same Ilock as the Pro Tools license. Does anyone have a solution for this? Honestly, I can't understand why there is this restriction even if you have the right license. Thanks for your help and ideas! Kind Regards Silas |
Re: S6L/S3L Pro Tools Playback Engine Restrictions
The biggest issue is that currently AVB is not a "network" protocol to the extent that we're used to. It's set to connect devices directly with each other, not to broadcast to multiple devices that can "pick off' part of the stream that the user wants. I would watch Robert Scovill's The Lab series on YouTube. The latest should be up sometime today and it's specifically about redundant systems. I know that he uses an S3L as part of his system, you might be able to glean some information that will help your current situation.
|
Re: S6L/S3L Pro Tools Playback Engine Restrictions
|
Re: S6L/S3L Pro Tools Playback Engine Restrictions
Quote:
|
Re: S6L/S3L Pro Tools Playback Engine Restrictions
Quote:
|
All times are GMT -7. The time now is 03:36 PM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com