Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   Pro Tools 12 (https://duc.avid.com/forumdisplay.php?f=142)
-   -   BIG PAN Bug in PT12.5.2 (https://duc.avid.com/showthread.php?t=388435)

bucha 01-27-2017 02:57 AM

BIG PAN Bug in PT12.5.2
 
A small pic is better than a big speech (also available in PT 12.7.0, tested in Native and HDx) :

http://img11.hostingpics.net/thumbs/...12665924PM.png

Carl Lie 01-27-2017 03:38 AM

Re: BIG PAN Bug in PT12.5.2
 
can't tell from the small pic. Maybe I'm getting old.

Is the pan line drawn above offset toward center from right yet your seeing a complete move to the right side?

C

JFreak 01-27-2017 04:14 AM

Re: BIG PAN Bug in PT12.5.2
 
Does it work differently in earlier versions? All I can see is panning from left to right in LCR realm, in which case the middle of the transition would be full center.

garret 01-27-2017 07:13 AM

Re: BIG PAN Bug in PT12.5.2
 
That looks fine to me. What's the problem? There won't be an overlap between left and right.

simonchase 01-27-2017 07:30 AM

Re: BIG PAN Bug in PT12.5.2
 
It doesn't seem to match up perfectly. The result appears to be centre only for a while before the automation of the pan actually gets there. But it's hard to see from the waveform. It looks a little off to my eye though

garret 01-27-2017 07:50 AM

Re: BIG PAN Bug in PT12.5.2
 
I just did it in 12.4 and it looks pretty much the same

bucha 01-31-2017 02:55 AM

Re: BIG PAN Bug in PT12.5.2
 
Sorry guys,

So the selection ends where the pan is at 0.
It begins at 19 on the left.
So, on the recording track, we should have sound on the left channel until the 0 position (and the decay should be linear ??).
It's pretty much the same thing on the right channel.
This "bug" remains for all the multi channel tracks from LCR to 7.1.
Thanks.

garret 01-31-2017 04:27 AM

Re: BIG PAN Bug in PT12.5.2
 
Hmm. Yes I just tried this in PT 10 and it is working correctly. My Selection is the same as yours. Beginning at 19 and ending at 0.

http://www.hostingpics.net/viewer.ph...31at122421.png

joachim 01-31-2017 05:46 AM

Re: BIG PAN Bug in PT12.5.2
 
From an older thread : http://duc.avid.com/showthread.php?t=282160
that includes this link : http://www.pharoahaudio.com/pannerautotest.html ,
it seems, that the more breakpoints are around the 0 degree area, the better.

But it is tedious to put those additional breakpoints in (via insertion near center and write-to-all-enabled and only Pan enabled in the Automation Window).

My test in PT 11.3.1 (maybe valid for PT 12 as well):

https://dl.dropboxusercontent.com/u/...%20Panning.JPG

https://dl.dropboxusercontent.com/u/...reakpoints.JPG

joachim 01-31-2017 06:21 AM

Re: BIG PAN Bug in PT12.5.2
 
Quote:

Originally Posted by garret (Post 2410147)
Hmm. Yes I just tried this in PT 10 and it is working correctly. My Selection is the same as yours. Beginning at 19 and ending at 0.

http://www.hostingpics.net/viewer.ph...31at122421.png

Out of interest : if there is no signal generator as insert on the track, but a consolidated audio clip of the noise, is it still correct ?


All times are GMT -7. The time now is 12:18 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com