Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Pro Tools TDM Systems (Mac) (http://duc.avid.com/forumdisplay.php?f=11)
-   -   Calibration issue (long time user) (http://duc.avid.com/showthread.php?t=340120)

ChrisSnyder 06-20-2013 10:38 AM

Calibration issue (long time user)
Hey guys!

I have 2 Digidesign 192. I have calibrated them with alot of gear thru the years.

Just bought a mastering eq and a mastering compressor, hardware. To put on my 2bus.

Sending a -18db sine on a stereo audio channel, inserting my hardware I/O, getting different levels on left and right, trimming the knobs in the back on my 192, match the levels exactly, restart pro tools or opening a different projects.. and bam, right or sometimes left channel differ 2-5 db, just like prior to calibration .. Opening upp my calibration project, same thing, different levels on L and R.

Has it something to do with me trimming like, the wrong trim knobs on the back? I mean, I can both trim the inputs and outputs..

And yes, I have used the calibration guide in the manual .. and this way. Same result ...

What am I missing ?

Thank you for your support!


Chief Technician 06-20-2013 02:51 PM

Re: Calibration issue (long time user)
Are you turning trim A while having Setup-->Hardware set to use the settings from trim B?

ChrisSnyder 06-20-2013 03:00 PM

Re: Calibration issue (long time user)
Only turning A.

Like i wrote, i turn the trims and match the levels. But then it drops it.

Chief Technician 06-20-2013 03:56 PM

Re: Calibration issue (long time user)
Is the calibration level setting (Setup-->Preferences) being reset? Are you opening a session that uses a different pan law (v9 or later)?

All times are GMT -7. The time now is 09:10 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com