Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   FireWire and USB Audio Interfaces (Win) (http://duc.avid.com/forumdisplay.php?f=19)
-   -   M Audio Fast track head phone port (http://duc.avid.com/showthread.php?t=411992)

OllieKas 09-23-2020 05:32 AM

M Audio Fast track head phone port
 
Hello all,

I own a fast track ultra which has two headphone ports. Port 2 is not responding. I was powering it via USB. To ensure that it is not a wall power issue, I recently purchased a wall power adapter with the specified specs and that hasn't helped.

Any ideas

Top Jimmy 09-23-2020 04:00 PM

Re: M Audio Fast track head phone port
 
The two front-panel headphone outputs are assigned to outputs 1/2 and 3/4, respectively as stated in the manual.

If you want something to come out of the second headphone jack, you either route an output from the DAW to 3/4, or you use the Fast Track mixer built into the driver to route the 1/2 output to 3/4.

OllieKas 09-25-2020 01:16 AM

Re: M Audio Fast track head phone port
 
Dear Jimmy,

Thanks or your response it was insightful. How can I do the routing on the built in mixer and indeed from the DAW? Im using Qbase5 and my attempts have not yielded for both suggested solutions. Im probably missing "the how". I was able to shift the output from 1/2 to 3/4 on the DAW but it disables 1/2. Thanks

Top Jimmy 09-25-2020 01:29 AM

Re: M Audio Fast track head phone port
 
You either route the output in Cuebase to both 1-2 and 3-4 at the same time, or you use the M-Audio mixer app to route the 1-2 software output to both the 1-2 and 3-4 hardware outputs.

OllieKas 09-25-2020 08:08 AM

Re: M Audio Fast track head phone port
 
Hello Jimmy,

Thank you so much!

I managed to sort it out from the In built mixer. I had to rasie the faders for the software returns 3/4.

You are a savior. :-)

Regards


All times are GMT -7. The time now is 07:51 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com