M Audio Fast track head phone port
Hello all,
I own a fast track ultra which has two headphone ports. Port 2 is not responding. I was powering it via USB. To ensure that it is not a wall power issue, I recently purchased a wall power adapter with the specified specs and that hasn't helped. Any ideas |
Re: M Audio Fast track head phone port
The two front-panel headphone outputs are assigned to outputs 1/2 and 3/4, respectively as stated in the manual.
If you want something to come out of the second headphone jack, you either route an output from the DAW to 3/4, or you use the Fast Track mixer built into the driver to route the 1/2 output to 3/4. |
Re: M Audio Fast track head phone port
Dear Jimmy,
Thanks or your response it was insightful. How can I do the routing on the built in mixer and indeed from the DAW? Im using Qbase5 and my attempts have not yielded for both suggested solutions. Im probably missing "the how". I was able to shift the output from 1/2 to 3/4 on the DAW but it disables 1/2. Thanks |
Re: M Audio Fast track head phone port
You either route the output in Cuebase to both 1-2 and 3-4 at the same time, or you use the M-Audio mixer app to route the 1-2 software output to both the 1-2 and 3-4 hardware outputs.
|
Re: M Audio Fast track head phone port
Hello Jimmy,
Thank you so much! I managed to sort it out from the In built mixer. I had to rasie the faders for the software returns 3/4. You are a savior. :-) Regards |
All times are GMT -7. The time now is 09:29 PM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com