Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) (http://duc.avid.com/forumdisplay.php?f=15)
-   -   Mbox Pro+Eleven rack via SPDIF doesn'work (http://duc.avid.com/showthread.php?t=410154)

Oscar Soto 05-12-2020 03:36 PM

Mbox Pro+Eleven rack via SPDIF doesn'work
4 Attachment(s)
OOhhhh gosh, my
bad streak does not end.

Well, I have a little issue, and I want to share with you, if anyone can help me I'll be so grateful.
Well, I usually use an Eleven rack with a DIGI002 via SPDIF+ PT11, and now, I want to do the same connection with a MBOX PRO, but that interface doesn't work well, I've changed the clocks master and slave between them but the Eleven rack change the external of clock show and says "Ivalid or none" or "Valid".... this doesn't happen with DIGI002, now I have digital noise, and obviously, I don't have signal at pro tools.
Does anybody know how can I fitx it?

iMac, Procesador 2.7, Intel Core i5, 2013
Memory 8 GB 1600Mhz DDR3
macOS High Sierra Ver. 10.13.6
Principal Interface DIGI002 Mixer
PT 11
Eleven Rack
Mbox Pro.

Darryl Ramm 05-12-2020 04:01 PM

Re: Mbox Pro+Eleven rack via SPDIF doesn'work
Why do you need to slave the Eleven Rack from your interface? Do you have two S/PDIF cables connected both ways?

Do the simplest thing first. Connect one cable from the Eleven Rack S/PDIF Out to the interface S/PDIF In, and get that working.

Set the Eleven Rack clock to internal and set your interface to clock from it.

Are you using digital 75 ohm cable. Test with another cable.

Double check you are using the correct sample rate everywhere.

All times are GMT -7. The time now is 07:11 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com