Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   macOS (https://duc.avid.com/forumdisplay.php?f=92)
-   -   Profire 2626, Project Mix I/O, PT9 (https://duc.avid.com/showthread.php?t=308120)

protools123 09-24-2011 09:28 PM
Profire 2626, Project Mix I/O, PT9
 
What would be the best way to connect my Profire 2626 and Project Mix I/O together. Have the Project Mix as the main, and then adar the profire? How would I go about doing this? Cheers.

The Dougfather 09-25-2011 03:17 AM
Re: Profire 2626, Project Mix I/O, PT9
 
Use the Project Mix as the interface and then connect the 2626 using ADAT for 8 channels of expansion.

Quote:
The ProFire 2626 doubles as a standalone 8-channel preamp, 8-channel A/D-D/A converter and digital format converter. In standalone mode, the eight analog inputs route to the first eight ADAT optical output channels. This facilitates use of the line, instrument and mic ins—including the preamps—with other digital gear. Similarly, the first eight ADAT optical input channels feed the eight analog outputs to provide D/A functionality. You can also disable the D/A conversion to allow the analog input channels to route to both the analog and ADAT optical outputs—transforming the ProFire 2626 into a standalone 8-channel mic pre with eight discrete analog outputs plus 8-channel ADAT output. When the second optical port is not used for A/D conversion, the ProFire 2626 can also convert coaxial S/PDIF to optical S/PDIF.

albee1952 09-25-2011 06:56 AM
Re: Profire 2626, Project Mix I/O, PT9
 
And don't forget to set the Optical as the clock source:D

protools123 09-25-2011 11:16 AM
Re: Profire 2626, Project Mix I/O, PT9
 
So do I need the pro fire to be connected by firewire as well, or just the project mix?

albee1952 09-25-2011 11:35 AM
Re: Profire 2626, Project Mix I/O, PT9
 
Just the Project Mix. The 2626 needs only a lightpipe "cable" to the PM optical input.

protools123 09-25-2011 11:57 AM
Re: Profire 2626, Project Mix I/O, PT9
 
Quote:
Originally Posted by albee1952 (Post 1838387)
Just the Project Mix. The 2626 needs only a lightpipe "cable" to the PM optical input.
That's what I figured. 2626 out to project mix in?


All times are GMT -7. The time now is 03:25 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com