2019.5 OLED not responding properly
 

Bottom row of OLED's are not properly updating when switching from PAN to EQ or AUX.

It requires multiple button presses to display the correct function. (function is correct however, when touching or turning the knob the correct values change)

Any one else have this issue?

Re: 2019.5 OLED not responding properly
 

Sounds very similar to the problem I just had http://duc.avid.com/showthread.php?t=404596

Re: 2019.5 OLED not responding properly
 

+1


Sent from my iPhone using Tapatalk

Re: 2019.5 OLED not responding properly
 

The top row is not behaving as it should in some cases I am finding also.
For example, sometimes, when I click "inserts" for a particular track, the OLEDs won't update, but the green "In" buttons do.... Have to click "back" and try again to update.

Re: 2019.5 OLED not responding properly
 

Same here. (S3+Dock+Mojave).

Re: 2019.5 OLED not responding properly
 

It's broken :(

Re: 2019.5 OLED not responding properly
 

Can I ask....if you touch the knobs when the OLED's are displaying the wrong thing...do they change to the right display ? (Just want to make sure we are seeing the same thing)

Re: 2019.5 OLED not responding properly
 

No, it's just strange. There seems to be a HUUUUGE delay when you touch someting. Sometimes the OLEDS will react, sometimes they won't.
On my system it feels as if the displays do not get the command to 'update' or 'refresh' at the correct rate. This also goes for volume readout when you move the faders.
As an example you mightl see the name of the track, then it will jump to -40 then it will stay there although the track is at minus infinite.
As this is rather annoying I hope for a quick fix.

Re: 2019.5 OLED not responding properly
 

OK, so this is not the OLED issue others are seeing (although you are probably seeing that too) It sounds like the system is bogging down. Can I ask you to uninstall using the 19.5 installer, check remove all Apps and remove all prefs, and then reinstall.

Re: 2019.5 OLED not responding properly
 

Eddie - you may be asking specifically about the S3 - but on my Artist Mix where the OLED labels don't update - changing a plugin parameter works correctly - and the label then seems to update to be correct.