how to create more Inserts on Channels & Master Fader?
 

I've seen a YouTube on this.. I thought I saved it in my Library but it's not there? I spent a couple hours last night & this morning trying to find it..

Do any of you have it or would uoi kindly post the method??

Thanks

Re: how to create more Inserts on Channels & Master Fader?
 

I don't have a link to a video, but I guess you're talking about routing a track via an aux track and thereby getting access to its inserts, increasing the number of inserts available to that signal to twenty. That's the only way, I think.

Re: how to create more Inserts on Channels & Master Fader?
 

You get 10 inserts per track, split 1-5 and 6-10. Are you not seeing them or do you want more than 10?

Re: how to create more Inserts on Channels & Master Fader?
 

Indeed, just run thru an AUX on the way to the master. Having said that, if you need more than 10 inserts on a mix, you're probably not mixing right:o

Re: how to create more Inserts on Channels & Master Fader?
 

Hi,


Inserts are setup in the I/O page. Create a stereo insert then you can create mono sub paths as inserts. BUT if you are trying to place a mono insert on a stereo track then you'll have to use the methods above by routing to a mono aux or track and insert mono on that.




Chris

Re: how to create more Inserts on Channels & Master Fader?
 

This is accurate for hardware inserts. I suspect the OP wants to use more than 10 plugins. Plus, a single hardware insert could easily route thru several hardware units:o

Re: how to create more Inserts on Channels & Master Fader?
 

Got it.. Found the I/O & got more Inserts..

Thanks