Avid Pro Audio Community

Avid Pro Audio Community (http://duc.avid.com/index.php)
-   Pro Tools 10 (http://duc.avid.com/forumdisplay.php?f=91)
-   -   ProTools 10+CPTK vs. ProTools 10HD what are the diferences? (http://duc.avid.com/showthread.php?t=309753)

made 10-22-2011 02:11 PM

ProTools 10+CPTK vs. ProTools 10HD what are the diferences?
 
Is there a list of features that are not available for ProTools 10HD users that use their licence on a non HD rig (a macbook)
except the hardware related ones that are stated on the AVID site.
In PT9HD some features where is says PTHD in the manual don't work even though the software is called 9HD...

I read Track Punch and destructive Punch is working now. What about "transport record lock" which was not available in 9HD on a laptop...

any experiences?

thanks

DJ FADE 10-22-2011 03:28 PM

Re: ProTools 10+CPTK vs. ProTools 10HD what are the diferences?
 
i would be curious to learn about this too!

jeremiahmoore 10-22-2011 04:49 PM

Re: ProTools 10+CPTK vs. ProTools 10HD what are the diferences?
 
I think some of the PT9HD native (no hardware) vs TDM feature differences were with hardware-based features. Input monitoring per-track for instance.

-jeremiah

TOM@METRO 10-22-2011 05:39 PM

Re: ProTools 10+CPTK vs. ProTools 10HD what are the diferences?
 
Per track input monitoring is now included for all HD and CPTK.

jeremiahmoore 10-22-2011 05:53 PM

Re: ProTools 10+CPTK vs. ProTools 10HD what are the diferences?
 
OK! Glad to be wrong on that one.

-jeremiah

TOM@METRO 10-22-2011 05:56 PM

Re: ProTools 10+CPTK vs. ProTools 10HD what are the diferences?
 
From the Toolkit PDF...

Complete Production Toolkit
Features
A Complete Production Toolkit authorization
enables the following features in Pro Tools:

• Surround mixing, editing, and automation up
to 7.1 (depending on the output capabilities of
your audio interface)

• Up to a total of 256 voiced audio tracks (up to
768 voiceable audio tracks)

• Playback of up to or a combination of playing
back and recording up to 256 mono
tracks or 128 stereo tracks (256 available
voices) at 44.1 kHz and 48 kHz

• Playback of up to or a combination of playing
back and recording up to 128 mono
tracks or 64 stereo tracks (128 available
voices) at 88.2 kHz and 96 kHz

• Playback of up to or a combination of playing
back and recording up to 64 mono
tracks or 32 stereo tracks (64 available
voices) at 176.4 kHz and 192 kHz

• Up to 512 Auxiliary Input tracks per session
• Up to 128 Instrument tracks
• Fixed RAM Disk Cache allocation options
• TrackInput monitoring
• Ability to use QuickPunchon up to 64 tracks
• TrackPunch recording
• DestructivePunch recording
• Advanced Group dialog:
• VCA assignments
• Attributes tab
• Follow globals
• Momentary Solo Latch Back/Forward commands
• Custom Shuttle Lock speeds
• Numeric Keypad set to Shuttle mode
• AutoFades

• Advanced editing features:
• Continuous Scrolling
• Scrub Trim tool
• Replace Clip command
• Convert Clip Gain and Track Volume Automation
• Coalesce Clip Gain and Track Volume Automation
• TCE Edit to Timeline Selection command
• Selection of alternate field recorder audio
channels in the Pro Tools Timeline
• Expanding alternate field recorder channels
to new tracks

• Advanced automation features:
• AutoJoin with Latch mode
• Touch/Latch mode
• Trim mode
• Composite automation playlist
• Copy track automation to sends
• AutoMatch
• Prime controls for writing automation in
Latch mode
• Glide automation
• Trim automation
• Write automation to Start, End, or All
• Write automation to next breakpoint or
punch point
• Overwrite or extend Mute automation
• Snapshot automation
• Preview automation
• Capture automation
• VCA Master track automation
• Advanced video features:
• Multiple video tracks
• Multiple video playlists
• Video editing

made 10-23-2011 01:03 AM

Re: ProTools 10+CPTK vs. ProTools 10HD what are the diferences?
 
Hey Tom,
thanks for the feature list...
I see in your signature that you are on 10HD. Could you do the test if transport record lock with destructive punch works on a macbook?

thanks

titus

sunburst79 10-23-2011 01:18 AM

Re: ProTools 10+CPTK vs. ProTools 10HD what are the diferences?
 
On the chart comparing PT HD, PT HD Native and PT + CPTK the only difference listed is the PT+CPTK does not have the Solo AFL PFL function. Whether there are other missing features I cant say.


All times are GMT -7. The time now is 08:45 PM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com