Avid Pro Audio Community - Do Lacie Drives have the Oxford Chipset?

Avid Pro Audio Community (https://duc.avid.com/index.php)

- Storage Subsystems (https://duc.avid.com/forumdisplay.php?f=14)

- - Do Lacie Drives have the Oxford Chipset? (https://duc.avid.com/showthread.php?t=227715)

Re: Do Lacie Drives have the Oxford Chipset?

Quote:

Originally Posted by sunburst79 (Post 1280189)

Kinda way out there but your not trying to stripe the session data across two or more partitions on the same drive are you? You might want to check that all of your session files are in the same partition.

Same goes for writing session files to one partition and pulling samples out of another partition on the same disk.

No I am not striping the session. I am only working with one partition. Each partition has separate purpose. but a good thought and something to keep in mind if I ever DO have samples spread out.

Re: Do Lacie Drives have the Oxford Chipset?

Quote:

Originally Posted by albee1952 (Post 1280179)

No harm in trying trashing prefs anyway so go for that. I am curious why you chose to partition in 5 parts? The LaCie drives I have are not large enough to warrant partitioning (120-160 gig) so I don't know if that is having any affect. On drives of 200 gig or more, I generally partition in half but that's just a personal preference. I would be using both cores and try running the drive on a firewire 400 port. If you only have a single port, daisychain the drive to the computer and the 003 to the drive passthru. If the drive has no 400 passthru, put the 003 first and try a recording. While this chain is not recommended, it will work for the purpose of testing. Just make sure to dismount the drive before you shut down the 003(the reason DIGI does not like this chain is in case the 003 gets turned off while the drive is writing data, it will corrupt the data). If it records longer, then we know the FW800 port is to blame.

I did what you said and I daisy chained the glyph into the Digi 003 with the Digi 003 connected directly to the computer. and guess what?

it worked. I just completed a 70 minute record session and the only reason it stopped is because I had a 70 minute limit stated in preferences.

Now begins more questions. Why does Pro Tools not want to work with the 800 port? Why am I able to use the SAME 800 port in PEAK and record sessions of a few hours with no problem?

it just doesn't make sense. but at least I found a way to make it work. thanks for your advice.

Re: Do Lacie Drives have the Oxford Chipset?

Glad you made some headway. Firewire 800 has been hit and miss for a few people. I wonder if a different/shorter cable would have any affect on this?

Re: Do Lacie Drives have the Oxford Chipset?

I have never had any luck with 800 to be honest. not even on my powerbook. thing to keep in mind is that if you have a computer with 1 400 and 1 800, they are really sharing the same bus internally.

funny thing...I never got an answer from anyone about the actual topic of the thread!

Does anyone know what chipset Lacie uses?!
thanks

Re: Do Lacie Drives have the Oxford Chipset?

I was just going to suggest trying FW400 instead of 800, as we've seen some issues when they're using the same bus - good to know it worked for you.

Quote:

I partitioned into 5 parts because I learned that DIGI prefers hard drives not over 100 gigs for maximum performance.

I don't know where you heard that, but it's not true. In fact, it can potentially cause more problems than it would ever solve.

Quote:

Does anyone know what chipset Lacie uses?!

As far as I've ever seen, they use Oxford chipsets (911, 912, 922, 924).

Re: Do Lacie Drives have the Oxford Chipset?

thanks for the bit on chipsets!

Yes, the 400 worked, but only if I daisy chain it through the Digi 003. This is still odd, because essentially I a still sharing the firewire bus...just in a different way. But I get results so I guess problem solved. thanks for all your replies

Re: Do Lacie Drives have the Oxford Chipset?

In energy saver preference pane try to set the computer performance to 'maximum' or something similar. Hope this helps.

I also found somewhere in the Digi site that iMacs are not good for using the Music Construction Toolkit option of 48 tracks. This (I assume) means not good performance of iMacs. It was some 2 years ago, though. But I can be wrong with the suggestion of your iMac being to blame...

Re: Do Lacie Drives have the Oxford Chipset?

yeah, I pretty much blame the iMac right about now. I am working on getting a power mac so I can install extra firewire cards, consider pro tools HD, etc. the iMac's are nice, but I don't feel they are capable to handing a beast like Pro Tools. Other programs work just fine. what can i say, only so much money to spend on [bleep][bleep][bleep][bleep]. thanks for commenting

Re: Do Lacie Drives have the Oxford Chipset?

I am sad to say they are not. I bought the Lacie D2 quadra onlinse, in the believe that it was using a TI chipset, but I have now learned that is has the LSI (lugent) chipset. I am disappointet since several sites on the internet stated that the lacie d2 quadra had the TI chipset, even the oxford 911.

Re: Do Lacie Drives have the Oxford Chipset?

I forgot that I had chosen the legacy firewire control driver, and that is listed as LSI 1394 legacy driver on all my 1394 busses.
So the lacie d2 quadra can still have the oxford chipset. Let us hope so.
Sorry about my mistake.