MOBOX 3 PRO Breakout Cable
 

Can anyone tell me,

How long is the break out cable that comes with the MBOX 3 PRO?

Thanks in advance

SBS

Re: MOBOX 3 PRO Breakout Cable
 

It's about 6 to 8 inches I would say. I haven't connected it to my Mbox yet, but its not bad.

Re: MOBOX 3 PRO Breakout Cable
 

Thanks... I am trying to make location plans and need to connect my 11R to it via the Breakout cable...

SBS

Re: MOBOX 3 PRO Breakout Cable
 

Just out of curiosity, how where u going to connect it? The break out cable doesn't have optical in's or outs if that's what you where hoping for. It just has MIDI, clock, and spdif. Just wanted to give you a heads up in case you didn't know that.

Re: MOBOX 3 PRO Breakout Cable
 

Actually that's fine because the 11Rack doesn't have optical either. It has spidf which will work perfectly with his breakout cable.

Re: MOBOX 3 PRO Breakout Cable
 

Thanks I was told to use SPIDF for the Wet 11R

SBS

Re: MOBOX 3 PRO Breakout Cable
 

I'm not sure what you mean by "wet" 11R. If you want to use the 11R there's a couple of ways to do it.

1. You plug your guitar into the rack, with spidf out going to the Mbox Pro spidf in. Set up an audio track and record the processed signal.

Or...

2. If you decide you want to use the Mbox Pro's DI and a/d converters instead of the 11rack's, you set up an aux track that's bussed to an audio track. On the aux track, you set up an insert with the eleven rack. The signal goes through the processing and is recorded (processed) onto your audio track. In this case you will need spidf going both ways. Doing it this way makes your 11R function as a hardware effects device, similar to a reverb unit, etc.

By the way, you may already know this, but going by the looks of that breakout cable, it appears to be a female spidf jack, which is also what's on the 11R. So you will probably need to get 2 actual spidf cables to go each way.

You can get good Monster ones cheap on amazon.com:

http://www.amazon.com/Monster-IDL100...2&sr=8-1-spell

You can choose which length you want.

Re: MOBOX 3 PRO Breakout Cable
 

Thanks.... Good information ....

I did mean processed sound when I said wet. So I would only need the one cable going from the SPDIF out of the 11R to the input spdif of the breakout cable if I wanted to record the proceesed 11R guitar sound into its own track through the MBOX3?

Thanks again...

SBS

Re: MOBOX 3 PRO Breakout Cable
 

Yes, if you're doing it that way. However, if you wanted to have the 11R clocked by the Mbox, then you might need another cable going the other way. I could be wrong though. You might still be able to do it with just the one cable.

As to why you might want to clock off the Mbox - since it's a newer converter and clock design, it might slightly improve the sound of the 11R.

Since those cables are so cheap on amazon, I would just get a second one just to have handy.

You can buy cheap brand spidf cables, but since the price on those is so good, I figure you might as well go with Monster quality.

Re: MOBOX 3 PRO Breakout Cable
 

Thanks I did order 2....

Much appreciated and have a nice holiday...

SBS