Command 8 working with 2018?
Hey so my command 8 worked immediately when I first got it and was using PT12. I upgraded to 2018 with the exact same setup and now it stays offline no matter what I try (selecting/unselecting in peripherals, using different midi channels, restarting, re downloading and installing drivers from the avid site, I even tried hooking it up with a midi/usb interface connecting the command 8 with MIDI in/out and a motu into my mac via usb....)
Mac Pro 3.46GHz Westmere 6-Core 32GB sierra os 10.12 |
Command 8 working with 2018?
No drivers for C|8 necessary
You should trash prefs and try again. Does the system go into utility mode? Does all the fader cal, etcétera? I would plug the system up via USB directly to the MP. Also try to change the USB port on the MP to see if that’s an issue I would also try an install an old version of 12, and see if that makes a difference |
Re: Command 8 working with 2018?
Quote:
Did you changed or added something after you’ve upgraded ? Another control surface? Keyboard ? C|8 doesn’t like sharing :) |
All times are GMT -7. The time now is 12:05 AM. |
Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com