Avid Pro Audio Community

Avid Pro Audio Community (https://duc.avid.com/index.php)
-   Pro Tools 9 (https://duc.avid.com/forumdisplay.php?f=50)
-   -   No sound from XMON cue outputs (https://duc.avid.com/showthread.php?t=287954)

Calvinc3 11-22-2010 04:15 PM

No sound from XMON cue outputs
 
DUC,
I recently upgraded my Pro Tools HD software from version 8 to version 9. I am running Pro Tools HD3 on a Mac Pro with 8 Xeon [email protected] GHz, 6 GB of RAM, primary HDD is 600 GB, with two 1 TB drives for recording. I have a D-Command Main Unit with one Fader Module. I am using a 192 I/O as my primary audio interface, with a 96 I/O as my secondary audio interface. I have everything connected just as it is shown in the D- Command manual (XMON main outputs 1 and 5 to the control room speakers, cue outputs 1 and 2 to the recording room monitors, and cue outputs 3 and 4 to the headphone amp). The output from the 96 I/O is routed to the Cue Inputs. When I was using Pro Tools version 8.1, everything was working properly. However, after I upgraded to version 9, I was no longer able to get any sound from the cue outputs. The only change in my studio has been the upgrade to Pro Tools 9.
I also have a Creation Station PC running Pro Tools 8.0.4 through an 003 Factory+ Rack in the same studio. I connected the recording room monitors directly to the main outputs of the 003, and they worked fine. I'm using Pro Co DB 25 to XLR (male and female) and quarter inch TRS for routing audio signals between the 192 I/O, 96 I/O, and the XMON. I've checked all of the cables and everything is working properly. Please help!

Calvinc3

Craig F 11-22-2010 04:51 PM

Re: No sound from XMON cue outputs
 
did the Cue levels get turned down, deselected inputs, or turned off?

jjsoundoc 11-22-2010 05:28 PM

Re: No sound from XMON cue outputs
 
Also check that the i/o output for cue is set to analog.

JJ

ffarr 11-27-2017 12:46 PM

Re: No sound from XMON cue outputs
 
having same problems with no sound from cue sends outputs, did you get this problem resolved?

albee1952 11-28-2017 11:33 AM

Re: No sound from XMON cue outputs
 
7 year old post......:eek:

TopStudioMiami 02-26-2018 09:47 AM

Re: No sound from XMON cue outputs
 
Quote:

Originally Posted by ffarr (Post 2461593)
having same problems with no sound from cue sends outputs, did you get this problem resolved?


I have the same problem.! someone solved it?

TopStudioMiami 02-26-2018 09:47 AM

Re: No sound from XMON cue outputs
 
Quote:

Originally Posted by ffarr (Post 2461593)
having same problems with no sound from cue sends outputs, did you get this problem resolved?

I have the same problem.! someone solved it?

TopStudioMiami 02-26-2018 09:48 AM

Re: No sound from XMON cue outputs
 
Quote:

Originally Posted by albee1952 (Post 2461763)
7 year old post......:eek:

I have the same problem.! someone solved it?


All times are GMT -7. The time now is 12:41 AM.

Powered by: vBulletin, Copyright ©2000 - 2008, Jelsoft Enterprises Limited. Forum Hosted By: URLJet.com