Avid Pro Audio Community - Change a MIDI input channel for Strike

Avid Pro Audio Community (https://duc.avid.com/index.php)

- 003, Mbox 2, Digi 002, original Mbox, Digi 001 (Mac) (https://duc.avid.com/forumdisplay.php?f=15)

- - Change a MIDI input channel for Strike (https://duc.avid.com/showthread.php?t=202517)

WRETAUDIO

08-01-2007 08:25 AM

Change a MIDI input channel for Strike

My Roland drum module outputs on MIDI channel 10 which is standard for drums. Strike must receive MIDI on channel 2 for the MIDI notes of my drum module to be correct. I need a way to input MIDI on channel 10 from my drum module, change that over to channel 2, and then send it to Strike. What is the easiest way to do that?

musicalavtech

08-01-2007 06:42 PM

Re: Change a MIDI input channel for Strike

You should be able to edit the midi output channel of the Roland drum brain.

WRETAUDIO

08-02-2007 05:33 AM

Re: Change a MIDI input channel for Strike

The Roland TD-3 will not allow output on any other channel. I did how ever figure out the how to route it in PT to make it work. Thanks!

All times are GMT -7. The time now is 03:23 PM.